
Your design, executed faithfully.
We build remodels, whole-home renovations, additions and commercial tenant improvements from your drawings. Bring us in at schematic design and we'll keep the budget honest while the design can still change.
We partner.
We don't compete.
We work alongside architects and interior designers, never in place of them. There's no in-house redesign here, and we won't swap your specs for something that's easier for us to buy. Our job is to price what you've drawn, tell you plainly where it's going to be hard, and then build it the way you drew it.
Saif Elbanna, our founder, has spent more than 20 years managing residential and commercial builds. We take on a limited number of projects at a time, so the person you meet at the budget review is still paying attention when the tile goes in.
- Pricing while you designWe check the budget at schematic design, at design development and again at the permit set. If the drawings and the number start drifting apart, you hear about it while it's still a sketch revision, not a redesign after bids come back.
- Open-book estimatesOur estimates are line-item and organized by trade, with every allowance shown. You and your client can see what the stone, the tile and the millwork actually cost, which makes it a lot easier to decide where the money should go.
- Paid preconstructionA clear agreement covers pricing, value options and the schedule before anything is built. You get real numbers to design against, from the team that will be held to them.
- Reading the setBefore we price, we go through your drawings and specs in a constructability review with you. Where something is unclear or won't work in the field, we bring it back as a question. We don't fill the gaps with our own assumptions.
- RFIs and submittalsQuestions from the field come to you as RFIs, and product data, samples and shop drawings come to you as submittals. We track both in our project system, so answers are written down and nobody has to remember what was said on site last Tuesday.
- No silent substitutionsNothing changes without your sign-off. If a specified product is discontinued or the lead time won't work, we tell you, bring options and work with you and your client to find the right solution before anything gets ordered.
- Honest value engineeringWhen the budget has to come down, we show you what each option saves and what it changes about the design. Some cuts are worth making and some aren't. That call belongs to you and your client, and when we talk budget with the client, you're in the room.
- Schedule and tradesWe set a realistic schedule in preconstruction, report against it every week and tell you early when something moves. All trade work is done by licensed, insured subcontractors, and our team schedules and coordinates them, so your questions go to one place.
- One dedicated teamThe same team runs the job from the budget review to the final walkthrough. You get weekly progress updates and site photos you can share with your client, and the cost portal shows the budget and every change.


Built as drawn. Millwork, stone and hardware installed to your details by licensed, insured trade partners. If a detail won't work in the field, you'll hear about it before anyone cuts material.
Remodels, additions and commercial interiors.
Our residential work is remodeling: kitchens, primary suites and baths, whole-home interiors and additions in Rancho Santa Fe, Del Mar, Solana Beach, La Jolla and Carlsbad. Whole-home projects usually bring floor plan changes, structural and systems upgrades and new finishes throughout. They also raise the question of whether the family can stay in the house, so we work out phasing and occupancy in preconstruction instead of halfway through demo.
Kitchens are where coordination matters most. Cabinetry and millwork, stone, appliances, lighting and any structural changes all have to line up with your drawings and with each other. We manage that sequence so what shows up on site matches what you specified.
On the commercial side we do tenant improvements and build-outs, like the café we built on Carlsbad Village Drive and a retail build-out at UTC. The design questions are the same. What's different is that the owner usually has a business to open or keep running, so the schedule gets as much attention as the finishes.
Residential projects typically start at $100,000. Commercial projects have no stated minimum.
Complete drawings or a clear design intent, and one decision path.
You don't need a finished permit set to start the conversation. A schematic plan and a clear idea of the finishes are enough for a first budget range, and we'll tighten it as the drawings develop. For permitted work, we work with you through plan check and agency review.
What helps most is one decision path. Tell us early who signs off on what, whether that's you, your client or both of you together. When we know where a decision lands, RFIs get answered faster, changes get priced before they're built and the schedule holds.
Public PDFs, no login required. Prefer email? info@antoonservices.com
Recent projects
Antoon project photos.
Send us a set for a budget review.
Send whatever you have, at whatever stage it's in. A schematic plan, a finish schedule, sketches or photos of the existing space all work. We'll look it over, talk through budget, scope and schedule with you and your design team, and tell you straight whether the numbers line up with what your client has in mind.
Nobody commits to anything at this stage. If the project is a fit, the next step is a paid preconstruction agreement.
Call or text (858) 208-3206
info@antoonservices.com
16950 Via De Santa Fe, Suite 5060, Rancho Santa Fe, CA 92067









